Weak current College】 【how do wireless network relay configuration.

First surface we profile an article is about the wireless relay function to prevent stolen network content. However, there is one thing people have to bear in mind that the relay function and not all products have. So, how to implement effective combination of hardware and software, complete the relay function? here's a brief introduction to the masses about wireless network relay configuration.

Of course not all wireless equipment can complete the aim relay configuration of wireless network and expanding function, which requires a firmware order with net-use routing equipment used to refresh the DD-WRTV24 firmware, this version of the firmware provides us with a way based on convergence of the wireless client to seek in this way we can complete wireless network signal relay.

Wireless network relay configuration step 1: seek convergence wireless card notebook wireless signal scanning tools at home scanning signal strongest sites, determine a location after the strongest signal relay equipment effectiveness it is best to put here.

Wireless network relay configuration, in the second step: DD-WRT maintenance interface we find the WIRELESS tab, and then select basicsettings basic configuration, acquiescence here are configured for access points, he provides common AP access and signals from the accepted and other services. Because we want to be equipped with as purpose to the wireless network repeaters, here is fix for WIRELESSMODE wireless client (the client), wirelessnetworkmode wireless network type is configured as a mixed mixed, wirelessnetworkname (ssid) information add scan to wireless network SSID is tp-link, additional information adhere to, after we tacitly point SAVE button to keep the configuration.

Wireless network relay configuration step three: wireless fixed end we also need for wireless WAN interface interface types perform configuration, go to setup-> basicsetup interface, there will be a drop-down menu WAN connection types to get automatic automaticconfiguration-DHCP and custody.

Wireless network relay configuration step 4: assuming that there is no doubt we refreshed can see WAN interface access to address information, of course, this address is the practice of the House of the DHCP service on TP-LINK assigned, we can see that the address is 192.168.1.112, gateway address, DNS address is 192.168.1.1, the address is the address of maintenance, TP-LINK so we completed the expansion of the wireless signal and widening.

Wireless network relay configuration step five: of course there is a question here cannot be ignored, it is this wireless router maintenance address required cannot be the purpose of maintaining and address conflict, the cases according to practice this with maintenance address is 192.168.1.1, this would not be necessary to amend, replace into another segment, for example 192.168.0.1, and the DHCP service or to perform appropriate amendments.

Small Tip:

The amendments address pool, as well as the router itself maintain address we cannot SAVE button, because the point of the SAVE button after you restart the onset with can, therefore, on the two parameters that we have to factor it immediately APPLYSETTINGS button enabled.

Wireless network relay configuration step six: custody after we ended on wireless network relay function, and the expansion of wireless networks is our success into your home, our wireless router with an external network access functions, all network packets that are sent from the wireless network to a destination network he that one TP-LINK wireless router, and then further convergence with the INTERNET.

Small Tip:

Since our local wireless router only provides a relay service, so the company equipped ping192.168.0.1 (local wireless router maintenance of addresses) is to regulate, but to ping192.168.1.1 (purpose network that one wireless router maintenance of addresses) is not connected. So you can not seek the ping method to detect network connectivity.

Resolved that the relay configuration we can make no wireless network cards to resolve network cable connection to a local that relay wireless router LAN Ethernet interface of the ordinary, so there is no wireless network cards may also be enough to resolve wireless network access to the Internet do surfing.