Tuesday, December 14, 2010

【 Weak current College 】 startup error alarm sound code (1)---Power By 【 China power house network 】



Startup is a sound, it is the alarm sound! can refer to the following table:

Short: system boots
2 short: General error. Solution: reset the BIOS
1 long and 1 short: RAM or motherboard errors
1 long and 2 short: monitor or display card error
1 long 3 short: keyboard controller error
1 long 9 short: motherboard FLASHRAM or corrupted BIOS EPROM errors
Non-stop ring (long): the memory stick is not plug or damage
Don't listen to loud: power, monitor and video card is not connected
Repeat a short ring: a problem with the power supply
No sound no show: a problem with the power supply
AWIBIOS:
1 short: memory refresh failure. Workaround, replace the memory stick
2 short: ECC memory parity errors. Solution: enter the CMOS settings, close the ECC effectiveness
3 short: System basic memory (first 64) check failed
4 short: the system clock error
5 short: CPU error
6 short: keyboard controller error
7 short: System error in real mode, you cannot switch to secure mode
8 short: memory error
9 short: ROMBIOS inspection and error
1 long 3 short: memory error
1 long 8 short: displays the test errors
1 short: System to boot normal
1 short and 1 short and 1 short: the system a little self-test failed to initialize
1 short and 1 short 2 short: motherboard errors
1 short and 1 short 3 short: CMOS or battery errors
1 short and 1 short 4 short: ROMBIOS parity fail
1 short short short 1 2: the system clock errors
1 short 2 short 2 short: DMA initialization failed
1 short 2 short 3 short: DMA page register error
1 short 3 short 1 short: RAM refresh error
1 short 3 short 2 short: basic memory error
1 short short short 4 1: base memory address line errors
1 short short short-2 4: basic memory parity errors
1 short short short 3 4: EISA series device errors
1 short short short 4 4: EASANMI mouth errors
2 short short short 2 1 2 4 4 short short short (i.e. all began as 2 short sound combinations): basic memory error
3 short 1 short and 1 short: from DMA register failure
3 short short short 2 1: master DMA register failure
3 short short short 3 1: main interrupt handling register error
3 short short short 4 1: from interrupt processing register error
3 short 2 short 4 short: keyboard controller error
3 short short short 4: 3 display card memory error
3 short short short-2 4: display errors
3 short short short 3 4: did not find displays read-only memory
4 short short short 1 2: clock errors
4 short 2 short 2 short: shutdown errors
4 short 2 short 3 short: A20 errors
4 short short short 4 2: protect mode interrupt error
4 short short short 1 3: memory error
4 short 3 short 3 short: clock 2 errors
4 short short short 4 3: real time clock error
4 short short short 1 4: serial port error
4 short short short-2 4: parallel port error
4 short short short 3 4: digital coprocessors errors
Compatible BIOS:
1 short: System normal
2 short: System power-on self-test (POST) failed
1 length: power, if no error is displayed; otherwise, display card error
1 long and 1 short: motherboard errors
1 long and 2 short: a video card error
1 short and 1 short and 1 short: power errors
3 long and 1 short: keyboard error
1.AMIBIOS
1 short-memory refreshes failed
2 short — memory ECC checksum error
3 short — system basic memory (1 of 64K) check failed
4 short — the system clock error
5 short — the central processing unit (CPU) error
6 short — keyboard controller error
7 short — system real mode error, you cannot switch to secure mode
8 short — displays memory errors (display memory may be corrupted)
9 short — ROMBIOS inspection and error
1 long 3 short — memory errors (memory corruption, replace)
1 long 8 short — displays the test error (the monitor cable is loose or not plugged in steady display card)

No comments:

Post a Comment