【 Weak current College 】 Windows system common error tips encyclopedia

CMOSbatteryfailed
CMOS battery failure. Generally this occurs is the description to the motherboard CMOS powered batteries already running out of power, you need friends replaced the motherboard battery in a timely manner.
CMOSchecksumerror-Defaultsloaded
CMOS executing all check error discovered, to load the system default value. In general this sentence has two explanations: the first is that the motherboard CMOS battery is dead, the friends you can try changing the battery; the second interpretation is that if you replace the battery problem is still not resolved, then there may be problems shows CMOSRAM, if the Board did not have a year to the dealer for a motherboard, if after a year, let dealers sent back to the manufacturers fix!
FloppyDisk (s) fail or FloppyDisk (s) fail (80) or FloppyDisk (s) fail (40)
No driver floppy disk drive. System unable to get the floppy disk drive, the first thing to look at the floppy drive power cable and data cable is loose or reversed, it is best to put the floppy into another camera on a try, if these are not, then had to buy another, better in the current market the floppy drive is not expensive.
　
Harddiskinstallfailure
Hard drive installation failed. This is because the drive's power cord or cable may not connected or hard drive jumper is set incorrectly. Friends can check on the root of the hard disk is plugged in line to see the same root data cable on two hard drive jumper settings are the same. If you like, as long as the two hard drive jumper settings are not the same you can (a set as Master and the other as Slave).
　　
Harddisk(s)diagnosisfail
An error occurred while performing a hard disk diagnosis. This problem occurs in General is the hard disk itself in the event of a hardware failure, you can put the hard disk onto another camera on a try, if the problem is not resolved, you can only go to fix it. If the hard disk also in Oz period, it would be better to go for a piece!
　
HardwareMonitorfoundanerror，enterPOWERMANAGEMENTSETUPfordetails，PressF1tocontinue，DELtoenterSETUP
Monitoring functionality found error, enter POWERMANAGEMENTSETUP view details, or press the F1 key to continue on the program, press DEL to enter the CMOS Setup. Now better motherboards have a hardware monitoring functionality, users can set the motherboard and CPU temperature monitor, voltage regulator of voltage output bit monitor and on each fan speed monitoring, when the monitoring features in the find exception when powered on, then it appears this passage, then friends can enter the CMOS setup select POWERMANAGEMENTSETUP, in the right ** FanMonitor **, ** ThermalMonitor ** and ** VoltageMonitor ** view which part monitoring issued the exception, and then to be addressed.
　　
Keyboarderrorornokeyboardpresent
Keyboard error or no keyboard. Check the keyboard from the system board interface is connected, if the keyboard is plugged in, then it is the Board of the keyboard is broken, the motherboard as still in warranty period, friends can find resellers or motherboard manufacturer for resolution.
　　
Memorytestfail
Memory test failure. Reseat the memory modules, see if you can solve this problem occurred because normally plug in memory is not compatible with each other, there are conditions to change an! If you are using just a memory stick, then you must be a memory stick itself problematic, or go for a good article!
　
Overrideenable-Defaultsloaded
The current CMOS settings cannot start the system, load BIOS default values in order to boot the system. General is set within the CMOS error, my friends just enter the CMOS Setup and choose the LOADSETUPDEFAULTS loading system to the original settings and reboot will fix that.
　　
PressESCtoskipmemorytest
Memory check is in progress, press ESC to skip. This is because there is no set within the CMOS to skip the memory of the second, third and fourth test, post executes four times the memory test, of course, you can press ESC to end the memory check, however each boot after all this is too much trouble, you can enter the CMOS Setup and choose the BIOSFEATURESSETUP, which Enabled QuickPowerOnSelfTest is set to on, you can save it and restart the computer.

Resumingfromdisk，PressTABtoshowPOSTscreen
Boot from the hard drive recovery, press tab to display the post screen. This is because the market has the motherboard BIOS Setup provides Suspendtodisk (hard disk hangs) function, if we used to shutdown Suspendtodisk, then the next time you power on, the screen will show the prompt message.
　　
Secondaryslavehardfail
Detection from disk failure. May be caused by improper CMOS settings. For example, IDE devices, and is not connected to a slave, but in the CMOS Setup from disk, so this error occurs. If this error occurs, the friends you can enter the CMOS settings, select the automatically detect IDEHDDAUTODETECTION hard drive. If you use the above method of issue is not resolved, it may be hard drive power cable and data cable is not plugged in or hard drive jumper is set incorrectly.
　　
Abort,Retry,Ignore,fail?
Exit, retry, ignore, cancel? does not recognize the command, or changed so that the command cannot execute disk or device errors, may be a disk is damaged or floppy drive door did not close. Press A key to completely terminate and return to DOS prompt; press the R key to repeat the command, press I to continue processing, ignore the error, very risky, not recommended; press the f key does not execute the command in question, continue to the following address.
　　
AccessDenied
Denial of access. Try to open a marked as read-only, stored in a write-protected disk or locked files on the network. If you use the subdirectory on the "Type" command, or use the file "CD (chdir)" command, also have this information. You should use the Attrib command to remove the file's read-only status or removed from the diskwrite protection, and then try again.
BadCommandorfilename
Bad command or file name that does not recognize the input of the command. You should check to make sure you enter the command correctness, confirmed in the specified directory or Path command to specify the search path can find command file.
　
Booterror
Boot error. At boot time not detect their peripherals. You should check your computer settings parameters such as the users themselves will not be able to resolve this issue, find the specialized maintenance staff.
　　
Cannotfindsystemfiles
Can't find the system files. Try to never contains the system files on a drive that is mounted on the operating system. Should be used: "sys" command to copy system files to the root directory. Unless it is unable to restore system files and is only available Format/s command to reformat the disk.
　　　　　
Cannotloadcommand，systemhalted
Cannot load command, System abort the application overrides the memory of all or part of the command.com. You should reboot your computer, check the application the modified data is complete, if necessary can be copied to the subdirectory, command.com so quit the application when DOS can got command.com.
　
Cannotreadfileallocetiontable
Cannot read the file allocation table. The file allocation table is bad. If they could find some data, then they are backing up to a blank disk, you can use Chkdsk command to repair the file allocation table and, if necessary, reformat the disk. If the problem recurs, you should repair or replace the drive.
　　
DivideOverflow
Distribution, with the exception of the zero error overflow. Program may write errors, debugging, and other programs in memory. Check the memory of other processes or to no longer use the program.
　　
DriveNotReadyError
Drive is not ready. Do not place the drive or disk. Check the disk or disks.
　
DuplicateFileNameorFileNotFound
File name or not found. Give the filea name and an existing file name or file manipulation is not this file. Replace the name or check the spelling of the file name.
　　
Errorloadingoperatingsystem
Boot the operating system error. Operating system file is not found or is corrupt. Use the SYS command to the operating system files are copied to the drive, if desired, the config.sys and autoexec.bat files are copied to the root directory. If you cannot restore system files, boot the system from the floppy disk, backup data, using the Format/s command to reformat the disk. EXECfailure file failed. The application's executable file contains the affected Department buried errors, or due to the already open too many files and you cannot open the file, the file may be associated with the current DOS versions are not compatible. Check the version of DOS, such as the version is correct, you can edit the Config.sys Files in order to solve the problem.

Fileallocetiontablebad
File allocation table is corrupted. A number of reasons, such as virus attacks, sudden shutdown, not a graceful shutdown, and so can undermine the allocation table. To be able to find data to a blank disk, do not overwrite previous backup. Perhaps by referencing the Chkdsk command to resolve the problem. If necessary, reformat the disk, if the problem occurs repeatedly, then the drive is repaired.
　
Filecannotbecopiedontoitself
File cannot be copied into its own. You are in the source file and target file specify the same file, or forget to write the file name. According to the need to change the source or destination file, and then try again.
　　
FilecreationError
File creation error. May be in the disk does not have enough space for users to create files, create a file already exists and is read-only files or want to use already exists in the file name to replace the file name. You can change a disk, or use other target names, other target location, or use the Attrib command to remove the file's read-only property.
　　
Filenotfound
File not found. In the current directory or Path, Append command to specify any directory file not found, or the specified directory is empty. Check the spelling of the file name and location, such as the need to change the search path.
　　
Generalfailure
General failure. DOS cannot determine the cause of the error, usually because the drive disk is unformatted or formatted into non-DOS system. You should reformat the disk.
　　
IncorrectDOSversion
DOS versions do not match. Enter a different version of the external command. Use setver set version or use the correct executable.
　
InsufficientDiskSpace
Insufficient disk space. The disk has no free space to copy files or create the file. You can remove some unused files or replace a larger disk.
　　
Insufficientmemory
Out of memory. Not enough memory to process user input of the command, generally refers to basic memory. Should delete some memory-resident file or on the memory optimization management. You can also add more to the system's memory to accommodate the application.
　
Invaliddirectory
Illegal directory. Enter an invalid directory name, or the directory name does not exist. Check the directory of spelling.
　　
InvalidDriveSpecification
Invalid drive definition. No, the drive may be misspelled. If you cannot specify a drive, it is likely that you do not install the driver. Reinstall the CD-ROM drive.
　　
Invalidfilenameorfilenotfound
Invalid file name or file not found. Enter the file name contains invalid characters or wildcard, or reserved device name as the file name. Try using a different file name.
　　
InvalidMedia,track0BadorUnusable
Invalid format, 0 tracks is damaged or unavailable. Typically the disk is damaged. Replace the disk.