【 Weak current College 】 let wireless router farewell dropped three ways

When using a wireless router to network activities, some users often find themselves frequently dropped by a router. When they encounter the unexpected disaster, how to solve?

Raises the wireless router to frequent dropped for many reasons, we only proper remedy for different reasons, to make your own router completely "rehabilitation".

1. takes note of the substantial

Reason: while most manufacturers publicize their own wireless router products effective transmission distance of 100 m indoor, outdoor, 400 meters. But in fact, these nominal distances are theoretical data. In practice, the wireless router's signal cannot transfer such distances. When the router and network connection distance too far or obstructions between excessive, wireless signal attenuation is serious, and thereby reduce the wireless signal coverage leads to frequent disconnects phenomenon appears.

Solution: close the wireless router and the distance between the network card, minimal obstructions between them, or choose Add gain antenna, wireless network Extender to expand wireless network signal coverage.

2. takes note of the interference sources

Cause: If the wireless router nearby there is interference source, such as microwave ovens, can transmit or receive radio waves of mobile phones, Bluetooth devices, wireless speakers, and so on, then they will interfere with the normal use of the wireless router.

For example, some digital cordless phones use 2.4GHz band, and the wireless router is usually in the band. If two devices are used by the channel frequency are the same, so inevitably there will be mutual interference, throw away the fault line.

Solution: locate the source of interference and move them away. For channel frequency heavy match, you can change the wireless router's band to eliminate conflicts.

3. takes note of the transmission rate

Cause: the use of different wireless standards, wireless routers, often have different rates. As most 802.11g + up to 108Mbps high speed rate, the highest rate 802.11g to 54Mbps, etc.

Wireless router and network connection distances are different, their connection rate will change. For example, a standard used 802.11g + wireless router, in 3 m without blocking the wide rate may reach the theoretical value of 108Mbps, if you increase the distance between connections, wireless router in order to maintain the stability of the connection, as the distance increases and automatic spin down, automatically transfer rate to 54Mbps or lower.

Sometimes because of product design and connection distance and other reasons, some routers do not play automatically spin in a timely manner or has been in two different rates between swing so that you will have dropped.

Workaround: you can enter the wireless router's admin interface to manually on the wireless router to spin down, make wireless transmission more stable and reliable.

Other solutions

If you use the above method is still unable to solve a variety of off line failures, we also consider using the following methods:

1. update the Firmware. Generally the latest Firmware will eliminate the BUG exists in the product, make the product more stable and reliable.

2. the product is the heat. When product cooling-performing occurs is not stable. You can make the wireless router.

3. pay attention to the "irrelevant factors." If your network has a computer infected by a virus or Trojan, so a lot of useless packets will be blocked, have dropped the network; the network DHCP server, the IP address of the chaos caused, the same will make off the line. These products are not to be neglected.