【 Weak current College 】 XP optimization encyclopedia

1. start the tuning

1. turn off some with Windows startup programs and permanent program. Select Start menu--> click Run, type msconfig into the system configuration application ", in the [boot] bar turn off unnecessary programs that will hook in the box, turn off unnecessary programs that are not sure of the program not to throw off, avoid Windows error. (First try can cancel the software itself, not the permanent with this method again. ), Then press [apply], then reboot.

2. to WindowsXP set a fixed IP address. WindowsXP although into desktop speed quite fast, but the run action is a step by step, you must wait some time to really run the program. If your machine installed network card, WindowsXP will enter to the desktop after automatically search for IP addresses, so if you have not set a fixed IP address, it will waste a lot of time in searching for IP address above.

3, reduce disk scan time. WindowsXP without proper shutdown, when again the system will automatically execute ScanDisk. Before starting the scan takes 10 seconds of waiting time. You can then open the "start → run" dialog box and type "CMD" and click "OK" button after entering the command-prompt mode WindowsXP. At the command prompt, enter "CHKNTFS/T: x" (without the quotation marks as you type, x = wait time), for example, enter "CHKNTFS/T: 0", it means that no waiting time; enter "CHKNTFS/T: 3", it indicates the wait time is 3 seconds.

4. reduce the wait time of the operating system. To install multiple operating systems, so many operating system start menu you will find the default wait time is 30 seconds. Click on "my computer", select the "System Properties" dialog box, click the "Advanced" tab, under "startup and recovery" section click the "settings" button, check the settings page in the "time to display list of operating systems" and "when I need the time display recovery options" option before check box, and then set these two later enter the appropriatevalues to reduce wait times, click the "OK" button.

In addition to these four methods, we can in the registry on the startup project set, turn off unnecessary system services, besides usually frequently use disk cleanup, Disk Defragmenter can to some extent to improve system boot speed.

2. optimizing landing

1. shorten close handler "wait time. Select Start menu--> click Run, type regedit, registry editor pops up, look for [HKEY_CURRENT_USER\ControlPanel\Desktop], in the right window, select the WaitToKillAppTimeout, press the right mouse button, select "modify", its value data to 1000 i.e. close handler "wait 1 second (default value: 20000).

2. shorten the "handler" to wait between the time when an error occurs. Select Start menu--> click Run, type regedit, find pops up registry editor [HKEY_CURRENT_USER\ControlPanel\Desktop] in the right window, select HungAppTimeout, press the right mouse button, select "modify", its value data to 200, that is, the handler error wait 0.5 seconds (default value: 5000).

3, let the system auto shutdown to stop responding. Select Start menu--> click Run, type regedit, registry editor pops up, look for [HKEY_CURRENT_USER\ControlPanel\Desktop], in the right window, select AutoEndTasks, press the right mouse button, select "modify", its value data to 1 (the default value is: 0).

4, speeding up the menu display. Select Start menu--> click Run, type regedit, registry editor pops up, look for [HKEY_CURRENT_USER\ControlPanel\Desktop], in the right window, select MenuShowDelay, press the right mouse button, select "modify", its value data to 100 or smaller (default value: 400), 0 is not recommended, because in this way as long as the mouse accidentally touch the "all programs", the entire menu will come out, that such disarray.

5, to shorten the waiting time. Select Start menu--> click Run, type regedit in the registry editor, find the [HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control], in the right window, select the WaitToKillServiceTimeout press right mouse button, select "modify", its value data to 1 000 or less (the original set: 20000).

3. memory optimization

WindowsXP is a very good operating system, but it is the memory requirement is staggering, even if in is 128 megabytes of memory, a system memory causing slow. In WindowsXP, adding many new features but the memory consumption for households, we just put these unusual feature is turned off, then 128 megabytes of memory to us is more than adequate.

1.To cancel the "automatic updates" automatically update alert users to upgrade their systems, it will be permanent memory, so we put the "auto upgrade" feature off, changed to "upgrade" manually. Specific action is by right-clicking "my computer", click Properties, click the "automatic updates" in the "alert settings" section select "turn off automatic updates.

2. remove the "system restore" XP System Restore feature for most users, nothing is too big, so we decided to turn it off to save memory. Specific action is by right-clicking "my computer", click on properties, will pop up to the System Properties dialog box, click on the "system restore" and, "in all the drives on the turn off System Restore" option on the tick.

3. turn off the "Remote Desktop" XP this feature just provide network interoperability. For ordinary users, this feature is redundant, so we put it off, don't let it stay there wasted memory.

4. turn off "automatically send error" function, send the error to Microsoft, this is XP "automatically send error" function, an error on our part to send to Microsoft that has no meaning, so we should have put this feature off. Right-click on "my computer", click Properties, click on the "Advanced" → "error reporting", select "disable error reporting" feature.

5. turn off the "Visual effects" of unwanted effects, WindowsXP fuck with interface is really nice, good looking behindto consume large amounts of memory as a cost, relative to the speed and appearance, we prefer to choose the former, right-click "my computer", click Properties, click on the "Advanced" and in "performance" section, click on the "settings", click on the "Visual effects", where all the special appearance settings are off, we can save a lot of "memory".

6. close the "Internet time synchronization", "Internet time sync" so that your computer clock each week and Internet time server for a synchronization so that your system time is accurate, however this feature for us is not very useful, but also may cause panic. So we need to turn it off.

7. close the extra services like Windows2000, WindowsXP, and may as such as the http service, smtp service, the FTP service, these services as a permanent memory, so when WindowsXP booting, as too many service was launched, there are many services for us, the average user who is totally useless, so off they are a good choice.

4. hard disk optimization

1. use the NTFS file system format is installed. WindowsXPNTFS file system to FAT32 much secrecy, compressed files, use the permissions and the disk quota management capabilities. Therefore the file security and confidentiality, a FAT32. And to the NTFS file system under the operating system will not commonly used file compression, so with FAT32 than saving considerable space, so if it is to the FAT32 file system under the operating system (e.g. Windows98 ...) You may be unable to properly read a file in NTFS.

In addition, in sectors in the installation, the more information the effectiveness of NTFS is running on a FAT32 file system on a lot of good. Therefore here suggest that you use NTFS file system to install WindowsXP systems.

2, the IDE device set to DMA transfer mode. For some reason, WindowsXP can sometimes use the IDE channel parallel input/output transfer PIO mode instead of DMA mode. If this occurs, the user can manually change the IDE channel to DMA mode, which can reduce the device consumes CPU cycles. Open Device Manager (right-click on my computer, choose Properties, click the Hardware tab, click on "Device Manager" open), and then click to expand the "IDEATA/ATAPI controllers" branch, double-click the "PrimaryIDEChannel", click on advanced settings. Check the "transfer mode" drop-down menu, set them all as DMAIfAvailable (allows to use DMA), click OK. Then in the same way modify each IDE controller.

3. delete the Web cache content. Enter the Control Panel, double-click the "Internet Options" to "Internet Properties" in the [General] "temporary Internet files" below and click on "delete files" and "delete all offline content check, press the" OK ".

In addition, in the [General] there is also a [history] (History) is the way to delete a deleted. Remove some Temp scratch: like "E:\WINDOWS\TEMP" (Note: my XP install disc in E. ), "E:\DocumentsandSettings\ (user name) \LocalSettings\Temp" and some software exclusive Temp (most should have set in the software itself) also deleted together.

4. regular disk defragment. Hard drive long-term use, program and delete the software installation is according to the sector in continuous file fragmentation, resulting in a hard drive in the search for information, we will have to spend more time and affect performance. So the regular work of doing disk defrag is absolutely necessary. This time the WindowsXP in disk defragment than windows98 finishing programs have significant progress, at least not like to spend a lot of time, if the consumer too Windows own defrag program is not good, you can also use the Norton Speeddisk.

5. networkOptimization

1. fast browse LAN shared

Typically, WindowsXP in the connect to another computer, you will check each other's subnet on all scheduled tasks, this check will let you wait 30 seconds or more. Removed from the registry to find the "HKEY_LOCAL_MACHINESoftwareMicrosoftWindowsCurrentVersionExplorerRemoteComputerNameSpace".

In this key, there will be a {D6277990-4C6A-11CF-8D87-00AA0060F5BF} keys, it deleted, restart the computer, WindowsXP will no longer check scheduled tasks, speed will be increased significantly.

10/2, 100M card transfer rate

Select "start → connect to → show all connections", double-click the network card used by the connection, click "Properties" button, open the "Properties" dialog box, select the "Advanced" tab. In the "property" column "DuplexMode" LinkSpeed/, followed by the "set value" bar "will be" changed to "AutoMode 10HalfMode".

This manual will be 10/100 m automatic adaptation network connection properties for the 10M half-duplex mode, so that the card is not auto-negotiation between, let the network connection between the transmission of data with the speed of 10Mbps, greatly improving the efficiency of the transfer between network. This setting is valid only for part of the network card.

3. accelerate shared

Typically, when a WindowsXP connect to other computers, check each other's subnet on all scheduled tasks: it is redundant, but also will make you wait 30 seconds and is really too bad. First, locate the registry key HKEY_LOCAL_MACHINE\Software\Microsoft\Windows/CurrentVersion\Explorer\RemoteComputer\NameSpace. In this, is there a {D6277990-4C6A-11CF-87-00AA0060F5BF} key. Simply put it deleted, restart the computer, Windows will no longer check the scheduled task, and significantly increase the speed!

4. resolve when paused WinXP implementation issues

Start — network connection — a local connection, press the right button, select Properties, select the "Internet Protocol (TCP/IP)" and click on properties, use the following IP address: 192.168.0.1 and a subnet mask of 255.255.255.0, well, later on would not have come to a halt.