【 Weak current College 】 under Linux and Windows software name that corresponds to the part of the

The red flag is based on KDE Linux distributions. If you want to open a graphical interface: basically to 486 more cpu, memory above, 256m install command line mode, 128m memory is enough.
If you have more than one hard disk installed, the system to at least LINUX partition, SWAP partition 6G depending setting, usually 1G. There is not recommended to install the red flag, the reaction is slow, not easy to use, it is recommended to use suse or ubuntu. There is a linux, like 3D, ps has a corresponding alternative software, if you really want to use the original version, directly a wine is ok.

Report: linux alternatives to windows in the software
Mayaforlinux — maya Linux version
VariCAD-autocad alternative software, but expensive. Well ~ ~
Win — windows software Simulator
PhotoShop — Gimp, however, and PS how big the gap, but there is a plug-in version of Gimp that GimpShop, more suitable for users accustomed to PS.
Winamp/Wmp — Rhythmbox, one began to feel the insurgents, but then slowly discover this software is very good, of course, you may also try amarok, but just feel complicated.
Baofengyingyin-MPLAYER, this would have no objection.
Acdsee — gThumb, this also is very good, very powerful functionality.
Qq — new with Tencent, LUMAQQ qqforlinux not updated, the feature is also less than EVA.
MSN — MS, use pidgin (this can also be used on QQ, and many other IM also supported)
eMule———aMule.....
PpStream — qsopcast, can receive TV very, very much.
Kingsoft powerword — — 2003 has the Linux version, or you can also choose an interstellar translation Wang.
VirtualMachine — VirtualBox, very very wonderful virtual machine! is strongly recommended.
CoolEdit (new version called AdobeAudition) — — the audacity, the feature is also not bad
Quake3-openArera, open source version of quake3, out of the map and the map and Basic.

Commonly used temporarily to write so much.

The following section for multiplatform support software:

skype,
eclipse,myeclipse
mysql,
tomcat,
jvm,
firefox,
adobereader,

The red flag is based on KDE Linux distributions. If you want to open a graphical interface: basically to 486 more cpu, memory above, 256m install command line mode, 128m memory is enough.
If you have more than one hard disk installed, the system to at least LINUX partition, SWAP partition 6G depending setting, usually 1G. There is not recommended to install the red flag, the reaction is slow, not easy to use, it is recommended to use suse or ubuntu. There is a linux, like 3D, ps has a corresponding alternative software, if you really want to use the original version, directly a wine is ok.

Report: linux alternatives to windows in the software
Mayaforlinux — maya Linux version
VariCAD-autocad alternative software, but expensive. Well ~ ~
Win — windows software Simulator
PhotoShop — Gimp, however, and PS how big the gap, but there is a plug-in version of Gimp that GimpShop, more suitable for users accustomed to PS.
Winamp/Wmp — Rhythmbox, one began to feel the insurgents, but then slowly discover this software is very good, of course, you may also try amarok, but just feel complicated.
Baofengyingyin-MPLAYER, this would have no objection.
Acdsee — gThumb, this also is very good, very powerful functionality.
Qq — new with Tencent, LUMAQQ qqforlinux not updated, the feature is also less than EVA.
MSN — MS, use pidgin (this can also be used on QQ, and many other IM also supported)
eMule———aMule.....
PpStream — qsopcast, can receive TV very, very much.
Kingsoft powerword — — 2003 has the Linux version, or you can also choose an interstellar translation Wang.
VirtualMachine — VirtualBox, very very wonderful virtual machine! is strongly recommended.
CoolEdit (new version called AdobeAudition) — — the audacity, the feature is also not bad
Quake3-openArera, open source version of quake3, out of the map and the map and Basic.

Commonly used temporarily wrote thisMody.

The following section for multiplatform support software:

skype,
eclipse,myeclipse
mysql,
tomcat,
jvm,
firefox,
adobereader,

Here are a few paragraphs in the CAD software under LINUX:
From GPL to the commercial version, LinuxCAD system is emerging, and more products and projects under development. This number reflects the Linux desktop applications is to expand and mature.
CAD is a critical computer application engineering design. On the Linux platform good CAD application system? probably many engineering designers on Linux watch or expectations. The questions are how much reflect Linux as a desktop application of maturity. The answer is happy, not only the GPL way release 2-DCAD package Qcad, there are several types of commercial or public use CAD systems; of course, their performance and targets vary, and can meet different capital budget requirements.
1, Qcad system package
Qcad is the first GPL release of LinuxCAD package manner, there are several projects are currently under development, Qcad have publicly launched. Qcad is a simple 2-d Editor, use the format DXF as slate. Qcad is named since Qt development toolset. Since it is not dependent on a desktop system, so even if you do not have the KDE desktop environment, users can also be used. In Xfce and AfterStep use are quite normal. Icon and the menu is simple, fast and easy operation. A few minutes you can quick start into the world of design. All the basic features in this room.
Lines can coordinate, or relative offset of known to draw the line. Circles and arcs can also be easily generated, on geometry can be trimmed, expanding or detailed decoration. Font selection looks a bit limited. Of course, if you prefer, you can copy an existing font and modify it to produce a new font.
In Qcad, enter some aircraft wing portion of the configuration, all work properly. Modify the part, saved in the AC3D in assembling and extrusion molding is also passed. For AC3D users Qcad can serve as a good plane Model Editor.
2, CAMExpert system
CAMExpert is Qcad in the commercial application of the "big brother". It and Qcad have similar interface, but in an even more inclined to NC NC programming. Its features include NC input, NC production, route optimization, cutting optimization, from inside to outside contour cutting, NC output format separate configuration, CAM simulation, simulation speed control, smooth simulation and explicit fast translation, etc.
3、SISCAD-P
SISCAD-P is Staedtler company design 2-d parameter design CAD system. Relative to other packages, the installation of a somewhat complicated, especially for non-SuSELinux system users. SISCAD-P features include: design deform geometry parameters, contour, fully customizable user interface, limited constraint modeling and character modeling, etc.
The current demo version is available for download, the file size of the storage limits, can be designed with Qcad DXF file interchange. For Mandrake and RedHat Linux SuSE users, operations may be different.
4、ME10
It is Hewlett Packard Company ME10 branches CoCreate develops 2-d parameter design CAD system. The system has the best learning curve, easy to use. In General, for CAD systems, good text menu may be more than dazzling icon, perhaps making them only on the icon of meaningful. ME10 mega menu in occupies a large part of the screen, so you can easily cruising between the menu command.
ME10 features lie in the local Assembly "concept. A set of accessories can include many copies or different parts, when a part is modified, the entire component will be fully updated. According to this concept, a component can also be grouped into another component. So, you can create intelligent Assembly tree structure.
ME10 has its own built-in graphics and symbol browser with some components and engineering symbol library, also includingIGES compiler, perhaps it should also be supported DXF format.
5、CADDA
CADDA from DAVEG company. The system is a real CAD/CAM solutions to the same user interface with CAD and CAM functions. CAD data can be a model of 3-D or 2-D input. The user can select the early preparatory process, change and confirm the data, the processor can generate for CNC machine tools used by the program.
CADDA supports the following technologies: 21/2 milling and grinding drill design, 3-D free form milling, turning, ease off the bed, ease and grinding of settlement. One of the most new part is a CAD/CAQ modeling, and control for CNC machine tools provide direct program available. CADDA package broadens design system for 3DCAD equipped with CNC machine tool factory generates control software.
6、Varicad
Varicad is price excellent 3-D entity and 2-D mapping package. Users can choose to use the icon in the Panel or the drop-down menu system. Menu command of nesting level too deep, so some of the operations menu some slow and icon Panel is much faster. You can also enter at the command prompt to the status command. Varicad on the LThe area has many years of inuxCAD reputation. Varicad can be input or output format DXF and IGS or extrusion or rotation 2-D geometric modeling. The remaining solid modeling including: Prism, cylinder, Tim filled arch columns, frustums, truncated conical, tapered tube, spiral and circumference deformations etc. In addition to the standard Boolean Add (combined) and minus (cut off), you can also save to save the parts cut off. The remaining functionality also includes the chamfer, slices, beveled, drilling, grooving, milling, etc. Providing undo/redo functionality. Entity post-build, you can calculate and analyze the distance between the center of the body, and inertia, etc.
7、Microstation
Famous CAD Microstation series developed by Bentley products. Although no commercial LinuxCAD version, there is an academic version for research purposes. If you are interested in a lot of people, you may be able to launch a commercial version. Under Linux there are academic versions of UNIX version has similar features, but lacks simulation, TriForma and MS/J the use solid repository. So in 3-D, only be able to make frames and surface, however 2-D function is complete, if possible, Bentley will launch a comprehensive Porting Linux version. Microstation can form very good RIB file for BMRT or other Renderman-compliant system for rendering purposes.
8、Varimetrix
Varimetrix into LinuxCAD market already more than 3 years. Previous product called VXClassic, latest product called Vision Varimetrix. Both are commercial application software, the price may exceed personal user's budget. The products on the Linux/Wine that works well.
VXClassic according to the modular design. The first module is VX model itself with known as Unified Modeling of geometric parameters UPG engine that supports 3-D contour, surfaces and solids, and can transform between configuration. In addition to the traditional geometric operations, and to support the Perl scripting language, as well as support for the C interface OpenVx.
VXClassic second module is an Assembly of VX, intelligent positioning or Assembly configuration and components. Assembly process to implement concurrency control, which means that multiple designers can simultaneously work on a project. Can automatically generate BOM, BOM tree structure and presentation. You can display by calculation of total mass, Center of gravity, inertia, and part of the conflict. The third module is a VX and mapping, the Assembly process and equipment details made of engineering drawings. The module fully supports configuration of 2-d and limited constraints and can be used alone.
The last module is VX manufacturing system is a complete set of CAM Kit, support for up to 5-axis synchronized operations.
From GPL to the commercial version, LinuxCAD system is emerging, and more products andprojects under development.